Snapper7 Brushless Whoop Racer Drone BNF FPV Quadcopter Frsky Version w/ Three Battery

Worldwide Free shipping
Delivery date: 7 days
excluding shipping
Availability: 50 in stock

Snapper7 Brushless Whoop Racer Drone BNF FPV Quadcopter Frsky Version w/ Three Battery


This is BNF Basic/Standard Version, Compatible with Frysky Receiver, Please take it into account before ordering according to your Transmitter.


- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- Powerful Brushless motor and Smooth ESC
- CNC aluminum alloy propeller guard
- Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles
- Adjust the settings and the PID of the flight controller via OSD
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version
- Frsky Receiver Version


- Brand Name: JMT
- Mode Name: Snapper7
- Item Name: 1S Brushless Whoop racer drone BNF
- Wheelbase: 75mm
- Size: 98.5mm*98.5mm*36mm
- Weight: 28g

Mode: SE0703 KV19000
Stator Diamter:7mm
Stator Length:3mm
Shaft Diameter:Dia 1.0
Motor Dimension(Dia.*Len):Dia 10*14.5
No.of Cells(Lipo):1S

Flight controller
- Firmware: Betaflight_3.3.0_Crazybee
- MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
- Sensor: MPU-6000(SPI connection)
- Board size: 28.5 * 28.5MM
- Board weight: 3.5 g
- Power supply: 1S battery input (DC 3.5-4.35V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Frsky receiver with telemetry(D8/D16 switchable)
- Built-in Betaflight OSD(SPI Control)
- Built-in Current meter (Max 14A,could be modified to 28A by replace resistor)
- Built-in 5V 0.8A BEC with LC filter
- Built-in voltage detection
- BLHELI_S pass-through Ready
- Heading LED Ready

Frsky receiver Version
- SPI BUS receiver
- Frsky D8/D16 switchable
- Compatible both of Non EU and EU LBT transmitter
- Channels: 8ch or 16ch
- Failsafe support
- No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Package Included:

- 1 x Snapper 7 Frame
- 1 x Crazybee F3 FC (Frsky)
- 4 x SE0703 KV19000 Motor
- 1 x 40mm 3-blades propeller(4cw+4ccw)
- 1 x AIO Camera & VTX
- 3 x 3.8v 450mah 30C/60C battery
- 1 x USB Lipo/LIHV Charger
- 1 x Propeller disassemble tool
- 1 x Screwdriver

Multi flight mode ACRO/AIR/ANGLE
Brand name JMT
Mode Name Snapper7
Item name 1S Brushless Whoop racer drone BNF
Size 98.5mm*98.5mm*36mm
Weight 28g
MODE SE0703 KV19000
Shaft Diameter Dia 1.0
Len) Dia 10*14.5
Sensor MPU-6000(SPI connection)
Board Size 28.5 * 28.5MM
Board weight 3.5 g
Power supply 1S battery input (DC 3.5-4.35V)