HVT-2601 3.5" TFT LCD CCTV POE Tester Monitor Test Camera PTZ Controller DC12V Output

Worldwide Free shipping
Delivery date: 7 days
excluding shipping
Availability: 90 in stock

HVT-2601 3.5" TFT LCD CCTV POE Tester Monitor Test Camera PTZ Controller DC12V Output

- 3.5”TFT-LCD, 480(RGB)x320
- LED Lamp,easy to operate at night
- Micro SD card moveable
- User-defined shortcut keys(F1 and F2)
- LCD screen brightness/contrast/color Saturation adjustable
- Automatically adapts and displays the video format of NTSC/PAL
- 10xzoom,video image can be magnified to view the details, easy to use
- Video record and playback
- Snapshot and save the current image as JPG file in the SD card
- PING testing,test IP camera or other network devices’ ethernet port whether work normally, and the IP address whether right
- IP address scan, quickly search the IP address for the connected IP camera and other network devices
- POE voltage measurement,test the PoE switch’s voltage to IP cameras, wireless AP device and other PD devices
- Device Port flicker,easy to find the connected PoE switch port by sending special signals, the connected PoE port will flicker at special frequency.
- Link monitor; check the setting IP address whether occupied.
- TDR break point and short – circuit measurement( BNC cable, network cable etc)--Only for T model, not suitable for HVT-2601
- PTZ address scan, search up the ID of PTZ camera.
- Network cable and Telephone cable testing, display the sequence of connection and the NO of the LAN cable
- Support RS232/RS485/RS422,Rate 600 ~ 115200bps adjustable
- Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D,SAMSUNG
- PTZ protocol analysis, control protocol command displays to check RS485 transmission whether is normal, easy to find the fault device
- PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and the preset position
- DC12V 1A power output for camera
- Audio input test, test the audio signal from pickup devices
- Visual fault locator , to test fiber’s bending and breakage
- Lithium Ion Polymer Battery .The device employs advanced power control and protection circuit. The device is high power-efficient, energy saving and environmental protection. It can last 11 hours for normal use after charging for 4 -5 hours


Model 2601
Video Test
Signal mode NTSC/PAL (Auto adapt)
Display 3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution
LCD adjustment Brightness, Contrast, Saturation adjustable
Video IN/OUT 1 channel BNC Input & 1 channel Output
Video Output Mode 1.0 Vp-p
Video Level test
Level test Video signals measured in IRE or mV
PTZ controller
Communication Support RS232 and RS485
PTZ Protocol Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate 600,1200,2400,4800,9600,19200,57600,115200bps
Video Signal Generation
Color bar generator Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP cable test Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V 1A power output
DC12V power output Output DC12V1A power for camera
Audio input test
Audio input test test the pickup and other audio equipments on the front-end
RS485 data analysis
Data Monitor Captures and analyzes the command data from controlling device
10 x zoom of image
Image 10x zoom 10x zoom image display and video out
Photograph,Video record, Record playback
Photograph snapshot and save the current image as JPG file
Video record Video record and storage the file
Record playback To view the storage file in the SD card
Port flicker
Find the connected POE port quickly.
Port flicker
IP scan, Link monitor, PING test
IP scan Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor Check the IP address whether is occupied
PING testing Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
Cable scan
Cable scan Search the cable by the audio signal
POE tester
POE tester Display the power supply voltage and cable connection states
TDR Tester Only for T model
TDR Tester breakpoint and short circuit measurement(BNC cable, telephone cable)
Power Adapter DC 5V(1.5A)
Battery Built-in 3.7V Lithium polymer battery ,3000mAh
Rechargeable After charging 3-4 hour, working time lasts 11 hours
Low Consumption Energy saving technology, the battery icon real-time display
Operation setting English/Chinese and other languages OSD menu
Auto off 5-60 (mins)
Keytone On/Off
Working Temperature -10 degree ---+50 degree
Working Humidity 30%-90%
Dimension /Weight 194mm x 112mm x 48mm / 540g

Package included::
- 1x CCTV Tester PRO
- 1x Power supply (5V 2A)
- 1x LAN Cable tester
- 1x Lithium Ion Polymer Battery
- 1x BNC Cable
- 1x Safety cord
- 1x RS485 data cable
- 1x Instruction Manual
- 1x 4G SD card