DSO5202P 2Channels 7'' TFT LCD 800x480 USB Digital Oscilloscope 1GS/s 200MHz
Features:
- 200M bandwidths
- 1GSa/s Real Time sample rate
- Large (7.0-inch) color display, WVGA(800x480)
- Record length up to 24K
- Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
- USB host and device connectivity, standard
- Multiple automatic measurements
- Four math functions, including FFTs standard
- Provides software for PC real-time analysis
Specification:
| Model | DSO5202P |
| Bandwidth | 200MHz |
| Real-time Sample Rate | 1GSa/s |
| Equivalent Sample Rate | 25GSa/s |
| Record Length | 24K |
| SEC/DIV Range | 4nS/div-40S/div (in a 2, 4, 8 sequence) |
| Delay Time Accuracy | 500ps |
| Vertical |
| A/D Converter | 8-bit resolution, each channel sampled simultaneously |
| VOLTS/DIV Range | 2mV/div～5V/div at input BNC |
| Position Range | ±50V(5V/div),±40V(2V/div～500mV/div),
±2V(200mV/div～50mV/div)±400mV(20mV/div～2mV/div) |
| Rise Time at BNC | ≤1.7ns |
| DC Gain Accuracy | ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div |
| Trigger System |
| Trigger Sensitivity
(Edge Trigger Type) | DC: 1div from DC to 10MHz;1.5div from 10MHz to 100MHz; 2div from 100MHz to 200MHz;
EXT: 200mV from DC to 40MHz
EXT/5:1V from DC to 40MHz
AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity |
| Trigger Level Range | CH1,CH2: ±8 divisions from center of screen
EXT: ±1.2V EXT/5: ±6V |
| Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times≥20ns) | CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen) EXT: ±(6% of setting + 40mV)
EXT/5: ±(6% of setting + 200mV) |
| Holdoff Range | 100ns-10s |
| Trigger Type |
| Edge | Trigger on the rising or falling edge |
| Pulse Width | Trigger (when >,<,=,≠) on positive or negative pulses
Pulse Width Range: 20ns-10s |
| Video | Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) |
| Slope | Trigger (when >,<,=,≠) on a positive or negative slope
Set Time: 20ns–10s |
| Overtime | from the rising or falling edge
Set Time: 20-10s |
| Alternate | Internal trigger on edge, pulse width, video or slope |
| Measurement |
| Cursors | Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz.
Tracing: The voltage and time at a waveform point; |
| Automatic(32) | Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF |
| Display |
| Type | Right angle 7"TFT 16-digit color LCD |
| Resolution | 800*480 dots |
| Contrast | 16 gears, with the progress bar to show adjustment |
| Interface | USB host and USB slave |
| Power Supply |
| Voltage | 100-120VACRMS(±10%)，45Hz to 440Hz，CATⅡ
120-240VACRMS(±10%)，45Hz to 66Hz，CATⅡ |
| Power | <30W |
| Fuse | 2A, T rating, 250V |
| Mechanical |
| Size | Length: 313mm Width: 108mm Height: 142mm |
| Weight | 2.08KG (exclusive of packing and accessories) |
Accessories: probes x2, USB cable x1, CD x1, power cord x1, PDF manual.
