DSO328 2.4" TFT Handheld Digital Mini Oscilloscope Bandwidth 1Msps 0-200KHz STM32 Chip DIY Set
This DSO328 digital mini oscilloscope adopts STM32 chip, ARM Cortex-M3 processor and with 2.4-inch TFT screen. It's easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Adopt ARM Cortex-M3 processor (STM32), and include a 2.4-inch color TFT display screen.
Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
Come with instructions, easy to install and operate.
Upgrade version of DSO311 and the test performance is more stable.
With Auto/Normal/Single trigger modes, easy to capture the moment waveform.
Available rising or falling edge trigger and it runs faster than DSO138 & a good handle of data.
Observable previous waveform before trigger(negative delay).
Can freeze waveform display at any time(HOLD function).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.
TFT controller recognition function with cool black case, which makes it convenient to use in teaching and testing.
The SMD has been soldered, more suitable for electronic beginner.
Material: PCB + FR-4 Epoxy Board
Type: DIY Kit / Assembled Finished Product (Optional)
Display: 2.4" TFT Color Display
Input impedance: 1MΩ
Analog Bandwidth: 0-200KHz
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Maximum Real-time Sampling Rate: 1Msps
Comes 1Hz /3.3V square wave test signal source.
Sampling Buffer Depth: 1024 bytes
Vertical Sensitivity Range: 5mV/Div – 20V/Div (1-2-5 progressive manner)
Adjustable vertical displacement, and with instructions.
Coupling Modes: DC / AC / GND
Horizontal Time Base Range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
With automatic, regular and one-shot mode, easy to capture the moment waveform.
Trigger Modes: Auto, Normal, and Single
Trigger Position: Center of Buffer
Power Supply: DC 8V-10V, recommend DC 9V, no more than 10V
Probe: Connect the Probe to BNC
Finished Product Size: 120 * 85 * 48mm / 4.72 * 3.35 * 1.89in
Screen Size: 52 * 40mm / 2 * 1.57in
1 * DSO311 Digital Oscilloscope
1 * Alligator Clip Probe
1 * User Manual(English)