DF-20 Electric Hammer Mill Herb Grain Grinder Pulverizer Powder Machine 20KG/H
Material: Stainless Steel
Voltage: 110V 60HZ
Motor speed: 2840r/min
Machine size: 55x26x55cm(21.7x10x21.7inch)
Machine Weight: 25kg(55lb)
1.Before start the machine, make sure there is nothing in the grinding chamber, and then plug the electric outlet.
2.Close the cover and lock the screw on the cover.
3.Switch the machine and start the motor, and then feed the raw material into the feeding. The herbs could not be feed too fast and too much.
4.If the knife is blocked and the motor could not rotate, please switch immediately, to avoid the damage of the motor. And clear the blocking herbs and then restart the machine.
5.When the machine is working, open the cover or send finger into the grinding chamber is FORBIDDEN.
6.This machine is used for dry herbs, and not for wet and oil herbs.
7.The user should change the filter according to the different requirement.
8.The machine has an overheated protector. if the motor over loaded, it will be stopped automatically. Posh the overheated protector and restart the machine.
- 1 x Electric Hammer Mill Herb Grain Grinder Pulverizer Powder Machine 20KG/H