APM 2.6/2.8 ArudPilot Flight Controller Board with Mini Ublox M8N GPS for FPV

SKU: 8TTRDHIXNSR1731
Worldwide Free shipping
Delivery date: 7 days
*
*
$60.66
excluding shipping
Availability: 82 in stock

APM 2.6/2.8 ArudPilot Flight Controller Board with Mini Ublox M8N GPS for FPV

APM2.6/2.8 flight controller
Features:

- Arduino Compatible!
- Can be ordered with top entry pins for attaching connectors vertically, or as side entry pins to slide your connectors in to either end horizontally
- Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer
- Onboard 4 MegaByte Dataflash chip for automatic datalogging
- Optional off-board GPS, uBlox NEO-6M module with Compass.
- One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
- Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively.

Mini Ublox M8N GPS Module

Introduction:
A new generation Ublox GPS NEO-M8N,with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters. This mini Ublox NEO-M8N GPS reserves the functions of the last generation of NEO-M8N GPS, but of smaller size, which is perfect for mini size multicopter.

GPS Chip parameters:

- Receiver type 72-channel u-blox M8 engine
- GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
- SBAS L1 C/A: WAAS, EGNOS, MSAS
- Galileo-ready E1B/C (NEO-M8N)
- Nav. update rate1 Single GNSS: up to 18 HZ
- Concurrent GNSS: up to 10 Hz
- Position accuracy2 2.0 m CEP
- Acquisition2 Cold starts: 26 s
- Aided starts: 2 s
- Reacquisition: 1.5 s
- Sensitivity2 Tracking & Nav: –167 dBm
- Cold starts: –148 dBm
- Hot starts: –156 dBm
- Assistance AssistNow GNSS Online
- AssistNow GNSS Offline (up to 35 days)3
- AssistNow Autonomous (up to 6 days)
- OMA SUPL & 3GPP compliant
- Oscillator TCXO (NEO-M8N/Q),
- Crystal (NEO-M8M)
- RTC crystal Built-In
- Noise figure On-chip LNA (NEO-M8M). Extra LNA for
- lowest noise figure (NEO-M8N/Q)
- Anti jamming Active CW detection and removal. Extra
- onboard SAW band pass filter (NEO-M8N/Q)
- Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)
- Supported antennas Active and passive
- Odometer Travelled distance
- Data-logger For position, velocity, and time (NEO-M8N)

- Operating temp. –40° C to 85° C
- Storage temp. –40° C to 85° C (NEO-M8N/Q)
- –40° C to 105° C (NEO-M8M)
- RoHS compliant (lead-free)
- Qualification according to ISO 16750
- Manufactured and fully tested in ISO/TS 16949 certified production sites
- Uses u-blox M8 chips qualified according to AEC-Q100

- Supply voltage 1.65 V to 3.6 V (NEO-M8M)
- 2.7 V to 3.6 V (NEO-M8N/Q)
- Power consumption4 23 mA @ 3.0 V (continuous)
- 5 mA @ 3.0 V Power Save Mode
- (1 Hz, GPS mode only)
- Backup Supply 1.4 to 3.6 V

- NEO-M8N-0 u-blox M8 Concurrent GNSS LCC Module,
- TCXO, flash, SAW, LNA,
-Timepulse Configurable 0.25 Hz to 10 MHz

Model Features:
- Quick satellite searching, only need 10s to find 6 satellite in open space
- Built-in compass, refresh rate up to 10GHz
- Support GPS+BD+SBAS, or GPS+GLONASS+SBAS
- Suitable for APM2.5/2.6/2.8 flight controller
- Small size and light weight, weight only 18g

Package included:
- 1* APM 2.6 or APM 2.8 flight controller (optional, default APM2.6) (Side pin, straight pin optional, default straight pin)
- 1* Mini Ublox M8N GPS
- 1* Folding holder

Concurrent GNSS Up to 10 Hz
Aided starts 2 s
Reacquisition 1.5 s
Nav –167 dBm
Cold starts –148 dBm
Hot starts –156 dBm