3.5" HD-AHD/CVI/TVI/SDI 1080P CCTV Camera Tester Monitor CVBS PTZ Controller 12V

SKU: PVARRSZR1300
Worldwide Free shipping
Delivery date: 7 days
$206.60
excluding shipping
Availability: 46 in stock

3.5" HD-AHD/CVI/TVI/SDI 1080P CCTV Camera Tester Monitor CVBS PTZ Controller 12V

The new HD coaxial tester is developed for the On-Site installation and maintenance of coaxial camera,it also combine other functions analog camera test, UTP test etc. Its portability, user-friendly design and many other functions make the tester an essential tool for all installers or technicians.

Apply for:
- CCTV system installation and maintenance
- Dome camera and all in one camera testing
- Video transmission channel testing
- PTZ control

Features:
- 3.5inch screen display, 480(RGB)x320 resolution
- Low power consumption, working time lasts 7-11 hours
- LCD screen brightness/contrast/color saturation adjustable NTSC/PAL auto adjust
- AHD coaxial camera image display, coaxial PTZ control and call up the camera OSD menu
- Enhanced Color bar generator, PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight- system colorful images).
- LED Flashlight.
- HD coaxial control, PTZ control, color bar generator shortcut key.
- F1, F2 user-defined key
- Visual fault locator, to test fiber’s bending and breakage * (Optional)
- Digital Multi-meter, DC and AC voltage measurement, Resistance measurement Continuity test, Diode measurements, Capacitance measurement * (Optional)
- TDR cable test, TDR break-point and short-circuit measurement. * (Optional)
- PTZ control and PTZ protocol analysis
- Cable test, Test LAN cable or telephone cable, UTP cable etc, cable type and the sequence of wires will be displayed
- Support more than 30 protocols, such as Pelco-D, Pelco-P, SAMSUNG.
- Support RS485,rate 600 ~ 115200bps adjustable
- Built in Lithium Ion Polymer Battery(3.7V DC 3000mAh )
- Image display and data control integration
- Handheld HD coaxial tester, easy to carry and operation.
- Optical power meter, test fiber loss and value * (Optional)

Functions:
Video signal test
- The new HD coaxial tester ,built-in high definition 3.5”LCD-TFT 480(RGB)x320 resolution, view the image, easy and directly displays the camera image , support PAL/NTSCLCD screen brightness/Contrast/Color Saturation adjustable. Suitable for field construction and maintenance work

HD coaxial signal test
- Coaxial signal test, support 720p 25/30fps/ 1080p 25/30fps, the tester will display camera image, coaxial PTZ control and call up the camera OSD menu.

Video signal level test (Not for TVI CVI AHD test)
- Test video signal strength attenuation, longer video signal cable will cause the image to be dim, and reduce the image dynamic range, video signal is too strong, it will cause the virtual shadow, and reduce the sharpness of the image. It also can real-display the video level value, if out of range, notices will be display in the screen.

PTZ controller
- Display the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset position.

Enhanced color bar generator
- The tester sends out color bars via its BNC output to the monitor. This is used to test for a problem in the cable going from the camera back to the monitoring area

DC12V 1A output power
- Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.

Audio testing
- Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.

Cable tester
- Test LAN cable or telephone cable.

- Connect LAN cable or telephone cable with the HD coaxial tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as the serial number of the cable tester kit.

PTZ controller
- Search the Control protocol code from Multifunction keyboard or DVR by RS485 interface, test the PTZ control command data whether received anomaly and RS485 data transmission.
- Screen displays 16 hexadecimal codes such as
- PELCO-P:A0 00(Add) xx xxxxxx AF xx
- PELCO-D:FF 01(Add)xx xxxxxxxx

PTZ address scanning
- Search up the ID of PTZ camera. Help the engineer search the speed dome address quickly.

Visual fault locator
* (Optional)
- Visual Fault Locator with 650nm wavelength can emit red laser sources to test multi-mode and single mode fiber’s bending and breakage, and - Continuous light-emitting and 1HZ, 2Hz modulating light output. It is indispensable tool in fiber project constructing, fiber net-work maintaining, optical component manufacture and research.

Digital multimeter (Optional)*
- HD coaxial tester built in highly stable and reliable 33/4 digit (6600) digital multimeter. It is used for the DC and AC voltage measurement,AC and DC current measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement, Auto/Manual measuring range switching, relative value measurement and locking . It is easy operation and professionally accurate.

LED lamp
- Press the LED On/Off button to use the LED flashlight.

HD coaxial, PTZ control and color bar generator shortcut key
- HD coaxial, PTZ control and color bar generator shortcut key, easy to operate

F1, F2 User-defined shortcut keys
- The user-defined shortcut key is designed for improving the efficiency for the engineer, anytime press, easy to operate.

TDR cable test * (Optional)
- TDR cable testing, accurately measure BNC cable, network cable, controls cable's open circuit and short-circuits location. It greatly improves working efficiency

Optical power meter, test fiber loss and value * (Optional)
- The IP camera tester adopts the most advanced handheld instrument specific integrated chip , achieve ultra-low power operation, with the 7 TFT-LCD - High-definition screen display ,five wavelength calibration points 1625nm,1550nm ,1490nm , 1310nm , 1300nm , 850nm.Linear or nonlinear optical power display, it can measure the optical power value, and also be used for Relative measurement of optical fiber link loss.

Note:With sign“*”means functions are optional, Optional function need pay additional cost if asked to add any one of them in the tester

Specifications:

Model HD coaxial tester HD-2800ADHS series 【*】models are Optional
Video Test
Signal mode NTSC/PAL (Auto adapt)
Display 3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution
LCD adjustment Brightness, Contrast, Saturation adjustable
Video IN/OUT 1 channel BNC Input & 1 channel Output
Video Output Mode 1.0 Vp-p
Video Level test
Level test Video signals measured in IRE or mV (not for TVI,CVI ,AHD)
Video level meter (Optional)
Video Level meter PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement
PTZ controller
Communication Support RS485
PTZ Protocol Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate 600,1200,2400,4800,9600,19200,57600,115200bps
Video signal generation
Color bar generator Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP cable tester
UTP cable test Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V 1A power output
DC12V power output Output DC12V1A power for camera
Audio input test
Audio input test test the pickup and other audio equipments on the front-end
RS485 data analysis
Data Monitor Captures and analyzes the command data from controlling device
CVI test (support)
CVI video signal test 1 channel CVI in(BNC interface)support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable
TVI test (support)
TVI video signal test 1 channel TVI in(BNC interface) support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable
AHD test(support)
AHD video signal test 1 channel AHD in (BNC interface)support AHD 2.0 version, 720p 25/30fps,1080p 25/30fps,camera OSD menu control over coaxial cable
SDI test(support)
SDI video signal test 1Channel in (SDI interface)support 1280x720p 25/30/50/60Hz;1920x1080p 25/30/50/60Hz
Digital Multimeter (Optional) *
AC/DC Voltage 0-660V auto/manual range, the min resolution is 0.1mV
AC/DC current 660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
Resistance 660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ
Capacitance 6.6nf~66000uF, the min resolution is 1pf
Diode 0~2V forward voltage, the min resolution is 1mV
Data hold Hold and display the measured value
Relative measurement Display the relative power value
Continuity testing Built-in buzzer will sound, if resistance is lower than 50 Ω
Testing speed 3 times/ seconds
Data range -6600~+6600
Optical power meter (Optional) *
Calibrated Wavelength(nm) 850/1300/1310/1490/1550/1625nm
Power range(dBm) -70~+10dBm
Sensitivity(nW) 0.001nW
Connector type FC/PC
Data hold Hold and display the measured value
Relative measurement Display the relative power value
Visual fault locator (Optional) *
Visual fault locator Test fiber's bending and breakage ( SM and MM fiber)
TDR Tester (Optional) *
TDR Tester breakpoint and short circuit measurement(BNC cable, telephone cable)
POWER
Power Adapter DC 5V(1.5A)
Battery Built-in 3.7V Lithium polymer battery ,3000mAh
Rechargeable After charging 3-4 hour, working time lasts 11 hours
Low Consumption